Peterson 6mm Creedmoor Brass Box of 50

Peterson 6mm Creedmoor Brass Box of 50

$56.99 Unit price $1.14 per piece
Skip to product information
Peterson 6mm Creedmoor Brass Box of 50

Peterson 6mm Creedmoor Brass Box of 50

(SKU:PCC6MMCRD50)
MPN: 40040-R
$56.99 Unit price $1.14 per piece
In stock

Quantity:

All 50 count listings of Peterson Cartridge casings come in one of their plastic ammo boxes.

Made in the U.S.A.

NOTE: If you plan to load above SAAMI max pressure and are concerned about primer-pocket leak, Peterson recommends you try the 6mm Creedmoor SRP. While they do not suggest loading over SAAMI max pressures, Peterson's small primer pocket 6mm Creedmoor have proven to hold up over SAAMI max pressures when tested in their universal receiver.

Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.

This is not loaded ammunition.

Warning
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

Similar Products

  • 5 stars: 11 (85%)
  • 4 stars: 1 (8%)
  • 3 stars: 1 (8%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
B
Brad Jordan
Superior Quality

I have used Peterson brass for some time now, starting out with the .300 win mag long. Knowing the superior quality after I purchased a new prs rifle, Peterson brass was the only manufacturer I was looking for. Thankfully, Graf &Sons had some in stock. Lil or no case prep and as mentioned, superior quality. I highly recommend.

A
Ambrose Diaz
Peterson 6mm Creedmoor Brass

Few reloading sources carry Peterson brass so I was pleased when I found it on Grafs. Reasonable priced compared to Lapua, and from the reviews from other reloaders as well as LR and ELR competitive shooters using this in their customs loads, I figured I'd give it a try - I've made worse mistakes in my life.

My regular load printed .28" vs the .38 I was getting with Lapua Brass. Not tremendous improvement but it's a start. Will be buying Peterson brass in a few other calibers. Thanks Grafs!

B
Barry Wike
Great brass

Consistent brass with match quality.

S
Shawn Wilson
Peterson 6creedmoor brass

Brass is excellent. Good quality and last for several reloads.

T
Timothy Saunders
Absolutely Amazing

Absolutely amazing brass. Perfect condition.
Uniformity Consistency Quality just perfect
Highly recommend

T
Terry Jackson
Peterson 6creedmoor large primer brass

Very consistent all within .2 gr. H2O capacity.

D
Darrel Gentry
6mm CM

Great product, good quality, long lasting.

J
Jack Sopjes
6MMCM BRASS

THE FIRST BOX WAS GREAT!
THE SECOND OF 2 BOXES WERE LARGE RIFLE PRIMER INSTEAD OF SMALL

M
Michael Chan
Peterson 6mm Creedmoor Brass (LRP)

This has proven to be among the most consistent brass I have ever used. I reload for .308, 300WM, and 6mm CM. I hope that someday Peterson will make 300WM brass, because it is very difficult to find solid, match-grade brass for 300WM--mostly mid-grade stuff is available. In any case, I cannot recommend Peterson highly enough.

B
Bruce Prater
Peterson 6creedmoor brass

I just bought a Savage 10 GRS in 6mm Creedmoor and I'm doing load development. I decided to try the Peterson Brass because of the price difference compared to the Lapua that I use for 6mm BR Norma. So far I'm really impressed. The weights are very consistent and the neck runout is around .001 or less.
I'm ordering more today.
Dealing with Graf & Sons is always 5 Stars

S
Scott Mcleod
Peterson brass 6mm

Excellent brass and good price

P
Paul Simms Iii
Peterson Large Primer 6mm CM Brass

Purchased to turn into 22 Creedmoor brass. Recommended on several internet forums. Brass seems to be high quality, neck thickness varied from .0155 to .0165", and easily turned to .016". Case weights were consistent between 167 to 169 grains, with 93% ( 140 out of 150 ) being 168 grains. Would recommend. Quick shipping on Graf's part. Great to do business with.

G
Greg Yanders
Peterson 6creedmoor brass

Great brass,very uniform and consistent