Lake City Brass 7.62x51 Primed (New Brass) Bag of 100

Item #:LCP762X51
Price:$18.99
$0.19 per round
Shipping: One flat fee of $9.95 per online order.
Exclusions apply. Click for details.
Availability:In Stock
Backorders not accepted when out of stock
Shipping:This product cannot be shipped by the United States Postal Service or via air.
Volume Discounts:
Rounds Units Savings Price per Unit Total Price
100 1 <none> $18.99 $18.99
500 5 Save 5% $18.04 $90.20
1000 10 Save 10% $17.09 $170.91
MPN:27652001
Lake City Brass 7.62x51 Primed (New Brass) Bag of 100
Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.
Read 4 Reviews

Product Information

This is new, primed brass from Lake City. It has never been loaded. Brass does have black neck sealant and crimped primers. 

This is not loaded ammunition.

Read 4 Reviews - Average Rating: 4.5 stars

Good Price

By Daniel Z. on May 09, 2019
The pricing for this primed military brass is very reasonable. The quality of the brass is good. Yes it's slightly tarnished but otherwise it's in very good condition. Should perform as good as US GI brass does.

Good Quality, But a Little Pricey

By Jorge O. on Jan 17, 2019
Brass came well packaged. The cases were a little dirty but was expected. These were a little more than my normal source but the difference is that the cheaper ones come loose and tend to be a little more dinged up. Won't be using the primers. Will have to tumble, re-size/de-prime, swage primer pockets' then trim if needed. Good brass would buy again if on sale.

good value

By Ronald B. on Dec 15, 2018
planning to do neck sizing today. ordered some 155gr Nosler CC's to try over TAC powder.

Good value brass

By Joseph G. on Nov 07, 2016
I shoot a M1A National Match in competition, and consequently I go through a lot of Lake City brass. I like the new production Lake City 308 brass, but that seems to be back ordered for a while. I have found the once fired stuff to be less than ideal because most of it has been fired in oversized machine gun chambers and suffers from weakening at the head. This brass does not have that problem at all. It is slightly tarnished and several cases have some residual powder granules stuck to the inside of the case, but for pull downs it is pretty good. Just make sure that you inspect each case carefully before loading. I sized it in a Forster National Match die with the decamping pin removed.All of the primers ignited properly. Obviously, you will need to remove the crimp after the initial firing. I shoot 168 SMKs on top of IMR 4895 or IMR 4064 in matches, but I have found that the Hornady 150g FMJBT on top of XX.Xg of IMR 4895 seated to 2.810" with a Wilson arbor seating die makes a dandy practice round out to 300 yards. Not as accurate as the SMKs, but pretty good and significantly less expensive to load for practice. Overall, I'd say that this brass is a good value. Shoot it once, tumble and do a full case prep, and it's ready for a match. Hope this helps. Be blessed. Mike
3 of 3 customers found this page helpful. Submit your own rating by logging in.