Prvi Partizan Brass 7.7x58 Japanese Unprimed Bag of 50

Prvi Partizan Brass 7.7x58 Japanese Unprimed Bag of 50
Item #:PPC77X58
Price:$37.99
$0.76 per round
Shipping: One flat fee of $9.95 per online order.
Exclusions apply. Click for details.
Availability:In Stock
Quantity Limit:Only 3 PPC77X58 allowed per customer. Duplicates will be canceled.
MPN:PPUC7J
Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.
Read 19 Reviews

Product Information

Imported from Serbia. Fully reloadable brass cases. Accept boxer primers. This is not loaded ammunition.

 

Read 19 Reviews - Average Rating: 4.9 stars

Excellent Brass!

By John J. on Dec 16, 2020
PRVI is top notch! Great price for this round and lasts for many loadings.

7.7 x 58 Japanese brass

By Donald M. on Nov 11, 2020
This is great brass at a far better price than Norma. Norma is great stuff but since most of you will be firing this in surplus Arisakas or sporters built with the original military barrels, this brass easily fills your needs much more affordably.

Another quality product from PPU!

By Danny S. on Nov 04, 2020
The brass is great, sizes easily with a little lube and I really like that it is already annealled. After resizing and a little trim it loads wonderfully. Thanks PPU for a great product and a reasonable price too!

Prvi Partizan Brass 7.7x58 Japanese Unprimed Bag of 50

By Wilburt E. on Oct 15, 2020
Good brass and great economical choice for reloaders. Just understand that it is sized for .308 so you may need to bell mouth if using larger bullets (especially if cast)

Great Brass!

By James B. on Aug 06, 2020
Another great product from PPU. PPU brass is the only brass I use from my military rifles. Great quality at an affordable price. I’ve honestly never had a problem with PPu reloading components.

Great Brass

By Nicholas O. on Jul 22, 2020
Really good brass at a great price!

Works great!

By Mark C. on Jul 16, 2020
The Brass is really accurate and loads well over a dozen times even when fired through a Type 99 and type 92 Machine guns!

Prvi Partizan Brass 7.7x58 Japanese

By Mark B. on Jan 16, 2020
I've been using this brass for about three years and found that it's always consistent in quality. Have reloaded it 5 times and have seen no issues. Ordered another batch to keep shooting for another three years.

PPU brass

By Roger K. on Jan 13, 2020
I use a lot of PPU brass in several of my mil surp rifles. Always works perfectly every time!

7.7 Brass

By Curtis K. on Jan 06, 2020
Ppu is excellent quality. I've made my own 7.7 cases from 3006 cases. Not no more, I'll buy more as needed.

Examine When you get it

By Zachary S. on Sep 09, 2019
I have used this brass for many reloads. when it was new it was 2.275" long and max case lenth is 2.269" also the case mouth was sized to fit a .308 bullet. I used a 7.7 jap neck resizer and it expaned quite a bit. maybe I got a bad batch. anyways after I did that and reloaded it several times I am happy with it. PPU brass is good for using over and over again.

prvi brass

By PHILIP C. on Sep 02, 2019
This 7.7X58 brass is very good and at a very low price. I have reloaded them over and over.
This package is just back up stock.
Phil C

Excellent value!

By Keao Y. on Apr 20, 2019
I use prvi brass in any cartridge I have that they make, and I've not had an issue yet.

Work great in my Arisaka T99 7.7x58 Japanese rifle

By Daniel R. on Apr 12, 2019
I was glad to get this brass to load ammo for my rifle. It is well made, reasonably priced, and works great!

Well Made at Great Price

By Garret R. on Mar 12, 2019
The 7.7 Japanese brass is well made and was sold at a great price. Would buy again.

7.7 Jap Brass

By David V. on Nov 13, 2018
Difficult to find at good price like this. Been using it for long time

Great brass.

By John W. on Sep 06, 2018
I use PPU brass for all my milsurp cailbers. Fairly priced, and holds up well.

Great Quality and inexpensive

By Ivar A. on Sep 01, 2018
High quality brass and much better than making your own from .30-06 brass. 4 firings so far with no problems.

Works perfectly and much cheaper than preloaded

By Chris B. on Aug 10, 2018
The PPU brass holds up well, I'm on my 3rd firing and haven't even had to trim them yet. Along with that buying these with any kind of .311/.312 bullet you want in it makes this option cheaper and better quality than any of the preloaded ammo.
2 of 3 customers found this page helpful. Submit your own rating by logging in.