Prvi Partizan Brass 6mm Remington Unprimed Bag of 50

Item #: PPC6MM

Price:

$46.99

$0.94 per piece

Shipping: One flat fee of $12.95 per online order.

Exclusions apply. Click for details.

Availability:

Out of stock

Volume Discounts:

Rounds	Units	Savings	Price per Unit	Total Price
50	1	<none>	$46.99	$46.99
500	10	Save 5%	$44.64	$446.40
1000	20	Save 10%	$42.29	$845.82

MPN: PPUC6R

Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.

Read 6 Reviews

Product Information

Imported from Serbia. Fully reloadable brass cases. Accept boxer primers. This is not loaded ammunition.

View more Prvi Partizan products

Read 6 Reviews - Average Rating: 4 stars

uniformity

By Philip A. on Aug 12, 2022

Most uniform brass i have ever purchased. Case neck thickness required no trimming. Case weight varied no more than half a grain. Reloaded twice, cleaned, annealed, resized. Loaded 3 more times cleaned, annealed, resized then checked length. No trimming required. superb brass!

Thin brass

By Nelson H. on Jul 02, 2021

Developed a load for my 6mm using brass from another manufacturer. I checked the usual suppliers and Prvi Partisan was the only brass to be found, so I thought I would try it. When received I neck sized, uniformed primer pockets and trimming to length. Of 50 I discarded 5 because the primer pockets were so deep the uniformer would not reach the bottom of the pocket. The case necks were very thin a smaller bushing was needed for the neck sizing die.
I loaded the Prvi Brass with a charge used many times in other brands of brass and, as often as not, my bolt would stick shut from excessive expansion of this brass. It would have required FL resizing every reload. I’m not a fan.

Bullets

By Danny P. on Apr 13, 2021

Glad to find 6 mm Remington brass in stock.

Good Brass at a fair price

By S Peter P. on Oct 06, 2019

Visual inspection followed by loading then performance is pleasing. I shoot both 6mm and 6mm AI. Primer pockets are very uniform, no off-center flash holes, I fire form the 6mm AI, turn necks for both and use moderately hot loads and get up to 7 loads per case. Toss up between PPU & Hornady but superior to Winchester.

Decent brass

By Michael S. on May 28, 2019

I fireform 6MM Rem brass in my 6MM Imp chamber and was having a tough time finding the parent brass. Saw the PP brass and decided to try some. I've heard both good and bad stories about it but you never know until you try it. In raw form, it measures exactly the same as my Remington, Winchester and Hornady brass does. I saw no difference in the loading process either. Haven't shot it enough to know how many reloads I will get out of it but will buy some more down the road.