This is loaded ammunition.
The Process of Pendleton:
“Here at Pendleton Ammunition we take the utmost care in providing the best ammunition. All brass is inspected, sized, and tumbled in fine dry corn cob media. The brass is then measured, to insure proper length. Then they are run through a case prep center so all burrs are removed inside or outside the necks. Primer pockets and flash holes are checked for consistency.
All brass cases are primed with a hand priming tool. Brass is lined out on a flat surface to insure proper seating depths. Before brass is charged with powder, each is inspected with a flash light to make sure no foreign objects remain. We use consistent powders which is best suited for each caliber. Powder charges are determined by our load development team to develop the most consistent loads. Each powder charge is hand weighed and dumped into the brass case. Projectiles are seated to proper depths which is determined by OAL case lengths of each caliber.
With our extensive load development and testing, we have achieved chronographed loads that only vary in the single digit range, with many cartridges achieving exact velocity performance. Even though our single stage loading process is more time consuming, the result is the most consistent and accurate ammunition on the market today. We are very proud of our handcrafted Pendleton Ammunition which provides the hunter, the accuracy and lethality they demand. We think you will be pleased with its performance!”
Ray Koch (Owner)
Pendleton Ammunition LLC
Be the first to review this product! You'll be the talk of the town.