- Metallic Reloading
- Rifle Brass
- 7mm WSM
Hornady Brass 7mm Winchester Short Mag Unprimed Box of 50
This is not loaded ammunition.
Read 3 Reviews - Average Rating: 4.7 stars
Hornady 7mm WSM brass
By Mark L.
on Apr 26, 2019
Maybe over time complicity starts to creep into the manufacturing process. The inside neck diameter, even after I 'M' died to normalize this diameter, was really tight at the neck to shoulder junction. So tight it deformed the bullet. Tried powdered mica without much help. I had to open the neck to .308 and resize the neck with the FL die. This helped, however who needs to do all this work on NEW brass. And of course, the recommended trim length 2.090" had to be reduced. About 80% trimmed to 2.086". The rest had to be trimmed to 2.084". Even at this dimension many did not clean up to 100%. Otherwise Hornady does a fair job, but was better a year ago. What changed.
Hornady 7mm WSM Brass
By Joseph C.
on Nov 23, 2018
Hornady's brass is right to size. A top quality product.
The only step I do is to prepare the neck of the case with a Lyman "M" die. (This opens the neck to .001 larger than the bullet for about 1/16" deep. The inner part of the neck is sized to a good press fit for jacketed bullets.)
Hornady 7MM WSM Brass
By Travis B.
on Oct 02, 2018
Arrived on time as always from here. The brass is typical Hornady brass and puts my rifle back out on the range.
Was this page helpful?
Submit your own rating by logging in.