Peterson Brass 6mm Creedmoor Unprimed Box of 50

Peterson Brass 6mm Creedmoor Unprimed Box of 50
Peterson Brass 6mm Creedmoor Unprimed Box of 50
Peterson Brass 6mm Creedmoor Unprimed Box of 50
Item #:PCC6MMCRD50
$1.04 per piece
Shipping: One flat fee of $12.95 per online order.
Exclusions apply. Click for details.
Availability:In Stock
Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.
Read 6 Reviews

Product Information

All Peterson Cartridge casings come in one of their plastic ammo boxes.

Made in the U.S.A.

NOTE: If you plan to load above SAAMI max pressure and are concerned about primer-pocket leak, Peterson recommends you try the 6mm Creedmoor SRP. While they do not suggest loading over SAAMI max pressures, Peterson's small primer pocket 6mm Creedmoor have proven to hold up over SAAMI max pressures when tested in their universal receiver. 

Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.

This is not loaded ammunition.

Read 6 Reviews - Average Rating: 4.5 stars


By JACK S. on Oct 02, 2019

Peterson 6mm Creedmoor Brass (LRP)

By Michael C. on Aug 22, 2019
This has proven to be among the most consistent brass I have ever used. I reload for .308, 300WM, and 6mm CM. I hope that someday Peterson will make 300WM brass, because it is very difficult to find solid, match-grade brass for 300WM--mostly mid-grade stuff is available. In any case, I cannot recommend Peterson highly enough.

Peterson 6creedmoor brass

By Bruce P. on Dec 05, 2018
I just bought a Savage 10 GRS in 6mm Creedmoor and I'm doing load development. I decided to try the Peterson Brass because of the price difference compared to the Lapua that I use for 6mm BR Norma. So far I'm really impressed. The weights are very consistent and the neck runout is around .001 or less.
I'm ordering more today.
Dealing with Graf & Sons is always 5 Stars

Peterson brass 6mm

By Scott M. on Dec 05, 2018
Excellent brass and good price

Peterson Large Primer 6mm CM Brass

By Paul S. on Nov 05, 2018
Purchased to turn into 22 Creedmoor brass. Recommended on several internet forums. Brass seems to be high quality, neck thickness varied from .0155 to .0165", and easily turned to .016". Case weights were consistent between 167 to 169 grains, with 93% ( 140 out of 150 ) being 168 grains. Would recommend. Quick shipping on Graf's part. Great to do business with.

Peterson 6creedmoor brass

By Greg Y. on Aug 15, 2018
Great brass,very uniform and consistent
Was this page helpful? Submit your own rating by logging in.