BPI ADJUSTA-DROP CHARGE BAR (SINGLE-STAGE)

Adjusta-Drop Charge Bar 

Model-SS 

BPI's ADJUSTA-DROP Charge Bar for MEC single-stage reloaders eliminates the need for a costly collection of bushings and charge bars. The ADJUSTA-DROP Charge Bar is fully adjustable for shot and powder drops that would normally require bushings and bars and has an attractive black anodized finish with engraved adjustment scales that are highly visible. The entire charge bar body is meticulously machined aluminum with a zinc-plated carbon steel threaded rod.

MEC Rubber Grommet (#130304G) and Brass Washer (#130304W): The Adjusta-Drop Charge Bar is designed to utilize MEC's rubber grommets and brass washers . These parts are essential for accurate drops in any charge bar. They must be placed inside the threaded cups of the measure assembly in order to prevent leakage.

Best of all, our new ADJUSTA-DROP Charge Bar is made entirely right here in Minnesota: Quality, value, and American-made pride come with every single ADJUSTA-DROP Charge Bar.

• Complete with our Pellet-Eez Shot Accommodation Bumper
• Fully Adjustable
• Made, Machined, and Assembled in Minnesota to Exacting Standards

MADE IN USA

WARNINGS/CAUTIONS: DO NOT USE THE ADJUSTA-DROP CHARGE BAR WITHOUT A FULLY CALIBRATED LOADING SCALE. POWDER DROPS MUST BE CONFIRMED BY A RELIABLE SCALE. BALLISTIC PRODUCTS, INC. DISCLAIMS ALL POSSIBLE LIABILITY FOR DAMAGES, INCLUDING ACTUAL, INCIDENTAL, AND CONSEQUENTIAL, RESULTING FROM USAGE OF INFORMATION OR ADVICE CONTAINED IN THIS AND OTHER PUBLICATIONS, LABELS, CATALOGS AND BOOKLETS.  USE DATA AND ADVICE AT YOUR OWN RISK AND WITH CAUTION. WHERE DATA LIST SPECIFIC COMPONENTS, NO CHANGES OR SUBSTITUTIONS FOR THESE COMPONENTS CAN BE MADE WITHOUT RISKING SIGNIFICANT CHANGES IN THE LEVEL OF BALLISTIC PERFORMANCE AND/OR SAFETY OF THE LOADS SHOWN.  FOLLOW LOADING DATA EXACTLY AND DO NOT SUBSTITUTE COMPONENTS. WE MAKE NO WARRANTIES EXPRESS OR IMPLIED, LIMITED OR FULL. FAILURE TO COMPLY WITH THESE AND OTHER STANDARDS OF RELOADING MAY RESULT IN ACCIDENTS WITH SERIOUS INJURY AND/OR DEATH TO THE SHOOTER AND/OR BYSTANDERS. KEEP OUT OF REACH OF CHILDREN. WE DISCLAIM ANY AND ALL LIABILITY FOR DAMAGE OR INJURY THAT MAY RESULT FROM YOUR HANDLOADED SHOTSHELLS AS WE HAVE NO CONTROL OVER ANY OF THE NUMEROUS POSSIBLE VARIATIONS IN COMPONENT PRODUCTION LOTS, IN TOOL AND DIE DIMENSIONS, IN YOUR LOADING PRACTICES AND PROCEDURES. THE INDIVIDUAL RELOADER IS SOLELY RESPONSIBLE FOR ANY VARIATION THAT MAY BE INCURRED BY ASSEMBLED AMMUNITION. TO AVOID SERIOUS INJURY OR DEATH TO SHOOTER AND BYSTANDERS, THIS PRODUCT SHOULD ONLY BE USED IN GUNSMITH-INSPECTED GUNS DESIGNED FOR MODERN SHOTSHELLS. IF GUN FAILS TO FIRE, KEEP POINTED IN SAFE DIRECTION FOR 30 SECONDS, THEN UNLOAD CAREFULLY. WEAR EYE AND EAR PROTECTION AND OBSERVE PROPER GUN SAFETY AT ALL TIMES. ALL PRODUCTS SOLD "AS IS."