- Shotshell Reloading
- Cards & Buffers
BPI OVERSHOT CARD 24ga .03"/.589"-Dia. 500/BAG
Place an overshot card on top of the shot charge just before crimping. Overshot cards ensure flatter, tighter crimps; more consistent load combustion and pellet containment. Besides the benefits of a proper crimp, overshot cards do the critical work of containing pellets within the shotcup during the firing cycle and during the journey through your shotgun's barrel. Recommended for all high performance loads.
Read 1 Reviews - Average Rating: 5 stars
Nice to have on hand
By Mark R.
on Jan 29, 2024
I keep a range of OS cards and cork spacers on hand for stack height adjustment in loads using straight wall hulls like Fiocchi and Cheddite. I have been experimenting with some Super G wads from Gualandi because they have the tightest seal around the powder cup and will limit powder migration when using fine grain powders like WST and RS Comp. However, the Gualandi wads are a bit short for our American load sizes so they can benefit from some stack height adjustment. In most cases, a 20gauge card or spacer will fit in the bottom of a 12gauge wad but the Gualandi wads are a bit tight so I bought these 24gauge cards as something that will fit in a Gualandi 12gauge wad. 24 gauge components are often hard to find because it is kind of an off-gauge. BPI didn't have these in stock but Grafs did. It's nice that Grafs mirrors some of the BPI components. Grafs has much prompter shipping than BPI.
Was this page helpful?
Submit your own rating by logging in.