SHARP-SHOOT-R WIPEOUT 5oz BRUSHLESS/BORE CLEANR 12c

Wipe-Out rapidly expands in your bore like shaving cream...Wait 60 minutes, then clean with a patch. Works on all types of fouling. 

WIPE-OUT™ has a unique new applicator tip that prevents Wipe-Out ™ from gushing back out of the barrel.  Simply hold the applicator tip against the muzzle or bore guide and apply the Wipe-Out™,  All that is necessary is a short burst.  Wipe-Out ™ is designed to rapidly expand into the barrel, like shaving cream.  The applicator tip may also be reversed for large caliber firearms or muzzle loading firearms up to 62 caliber.

• Reverse the Adapter for Large Caliber Firearms or Muzzle Loaders
• WIPE-OUT™ tells you when your firearm is fouled with powder residue, carbon, and metal fouling by the color left on a patch.

Directions: Shake the can very well before applying.  Push the muzzle adapter tight against the muzzle.   Count one -thousand one, one- thousand two, and that should be it.  You will feel the product on your finger. When the barrel is full a small amount will be present in the chamber…….it needs cleaning too. The next part is the best. Walk away! No brushing! In 60 minutes you return and push a good cotton patch through the barrel. Make sure you have a caliber specific jag. This assures a tight fit, and guarantees cleaning to the very bottom of the grooves.

Please be aware that large amounts of fouling on a very dirty firearm can build up in layers.

IF THERE IS NO COLOR ON THE PATCH……….THE FIREARM IS CLEAN.

IF THERE IS ANY COLOR ON THE PATCH: Apply the Wipe-Out ™ again to the barrel.

If the first patch showed all three colors, the gun is heavily fouled. Let the gun set for 60 minutes or more, overnight is best.   Wipe-Out ™ will continue to work for 24 to 36 hours. Wipe-Out ™ was formulated for long term soaking, to absolutely remove the most stubborn fouling.

Push a clean patch through the bore. If there is still color on the patch re-apply and let set for a longer period of time.  A very heavily fouled gun may take several overnight sessions, until no color shows on a patch.

A PATCH WITH NO EVIDENCE OF COLOR IS EVIDENCE OF A CLEAN FIREARM.

NOTE: Wipe-out does not dissolve lead.  Most chemicals that dissolve lead produce a galvanic reaction.  This reaction in effect acts like a battery.  In most cases it will etch steel ( both stainless and carbon steel).  It is for this reason that we don’t use chemicals that specifically work on lead. Wipe-out uses chemicals that will dissolve the other metals ( tin, antimony, zinc, etc.) that are incorporated in most bullet alloys.  So it works to destroy the integrity of the bullet alloy, and it begins to come apart in small black flakes.  This process takes about 24 to 36 hours. So while Wipe-Out™ does not dissolve lead, it will degrade the alloy so that it can be pushed out with a tight patch.