BURRIS RING 30mm XTR TACT PICATINNY MED MAT 2-RINGS
Product Information
The massive strength of a wide 6-screw ring is combined with lightweight yet thick cross section aluminum to provide a reliable return-to-zero ultra strong mounting system for Picatinny-style rails. Xtreme Tactical Rings are ready for the heaviest of scopes, massive recoil, and severe usage.
Technical Notes
| Ring Heights | ||||
| Low | Medium | High | Extra High | |
| Standard 1" | .150" | .270" | .390" | |
| Signature 1" | ||||
| Zee 1" | .130" | .255" | .450" | |
| Quick Detach 1" | ||||
| Zee Signature 1" | .270" | .420" | ||
| Standard 30mm | .180" | .300" | .420" | |
| Signature 30mm | ||||
| Zee 30mm | .205" | .330" | .582" | |
| Zee Signature 30mm | ||||
| CZ (all) | .480" | |||
| .22 Signature Deluxe | .400" | .793" | ||
| 1" .22 rings (all) | .295" | .450" | ||
| Dimensions listed are from the bottom of the scope tube to the bottom of the ring. | ||||
| To securely mount rings and bases, tighten to the following specification: | ||||
| Ring Tops - 18-24 in./lb. | ||||
| Bases - 28-32 in./lb. | ||||
| Rear windage Base Screws - 40-45 in./lb. | ||||
Customers Who Bought This Also Bought
Read 1 Reviews - Average Rating: 5 stars
Excellent for Removable Scope Use
By Leon G. on Jul 15, 2019
Although I favor the Burris Signature rings, I have need for detachable scopes since my rifle rack lacks clearance for a scoped rifle.
I have found the Burris XTR Tact rings very satisfactory as ersatz QD mounts. I carry a 1/2" box-end wrench in my range bag to tighten the base nut. Zero retention is very good; just remember when first attaching the scope, and for all successive scope mountings, to push the rings forward to the stops before tightening the base clamp nut.
Since the XTR Tact rings have 6 cap screws, I find it more than useful to use a torque driver. This ensures that the ring compression on the scope is even. On one occasion when I had to remove the XTR Tact ring from a scope, I noted that the scope was not marked where in contact with the rings.
I have found the Burris XTR Tact rings very satisfactory as ersatz QD mounts. I carry a 1/2" box-end wrench in my range bag to tighten the base nut. Zero retention is very good; just remember when first attaching the scope, and for all successive scope mountings, to push the rings forward to the stops before tightening the base clamp nut.
Since the XTR Tact rings have 6 cap screws, I find it more than useful to use a torque driver. This ensures that the ring compression on the scope is even. On one occasion when I had to remove the XTR Tact ring from a scope, I noted that the scope was not marked where in contact with the rings.
Add a Review
Was this page helpful?
Submit your own rating by logging in.
What started as a small dream has become a multi-million dollar international business
selling ammunition, reloading supplies and accessories.
