Hornady Brass 7mm-08 Remington Unprimed Bulk Bag of 100

Item #: HRN8646B

Price:

$53.99

$0.54 per piece

Shipping: One flat fee of $12.95 per online order.

Exclusions apply. Click for details.

Availability: In Stock

Volume Discounts:

Rounds	Units	Savings	Price per Unit	Total Price
100	1	<none>	$53.99	$53.99
2000	20	Save 5%	$51.29	$1,025.81

MPN: 8646B

Read 4 Reviews

Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.

Product Information

At Hornady, brass is the foundation for what could be the most memorable shot of your lifetime. Extra time and care is taken in the creation of their cases, producing smaller lots that meet strict quality standards. Hornady cases offer reloaders excellent uniformity in wall thickness, weight and internal capacity. They are measured for consistently tight wall concentricity and even run our cases through a pressure calibration test to ensure uniform case expansion during firing. Hornady cases allow proper seating of the bullet, not only in the case, but in the chamber as well. High quality brass contributes to consistent charges and pressures.

Features:

Hornady Unprimed Bulk Brass, Bag of 100
5% off a case (case = 20 bags)
Tight Wall Concentricity
Uniform Case Wall Thickness
More Reloads Per Case
Consistent Weight And Capacity

This is not loaded ammunition.

View more Hornady products

WARNING

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

Read 4 Reviews - Average Rating: 4 stars

7MM 08 brass

By Don R. on Feb 25, 2020

No issues with the brass. Loaded and shot fine.

Bulk Hornady 7mm-08 brass

By Ralph C. on Aug 23, 2019

Seems to be the same as the brass I have been paying twice as much for.

BRASS

By Richard W. on Apr 29, 2019

Good quality, reasonably priced brass for reloading. Thanks, Graf's.

RMW

Check primer pockets before use,

By ROBERT R. on Nov 05, 2018

Two of 50 did not have the primer flash hole completely punched out. This meant if case was reloaded, the completed round would not have fired. I found this out when neck-sizing new brass. Tried to punch first hole thru and lost one case. Inspecting remaining cases and found one more. I drilled the slug out. Surprised this brass made it thru QC, always considered HDY a step above WW and R-P. Be sure you inspect each case. New don't mean it is right.