CUTTING EDGE BULLETS 25 (.257) 80gr BULLET ESP RAPTOR 50/bx

CUTTING EDGE BULLETS 25 (.257) 80gr BULLET ESP RAPTOR 50/bx
Item #:CEBESPI80RP
Price:$60.99
$1.22 per round
Shipping: One flat fee of $9.95 per online order.
Exclusions apply. Click for details.
Availability:Special order item. Lead times are dependent on the manufacturer.
MPN:ESP I80 RAPTOR

Product Information

Enhanced System Projectile designed to be shot as a hollow point without the Raptor Tip™, a hollow point with the supplied Raptor Tip™ installed for long range shooting, or flipped around and shot as a solid for extreme penetration. Excellent lever gun bullets without the tip installed and are designed to magazine feed in any bolt action rifle with the tip installed. Instead of mushrooming, our hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a star pattern while the base contines through for even deeper penetration. A minimum of 1500fps impact velocity is required for the hollow point to function as intended. The required twist rate for these bullets is 1:9" or faster.

*These bullets come supplied with optional Raptor Tips™*

This is not loaded ammunition.

WARNING

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

Technical Notes

Material:  Brass

Caliber:  .257

Diameter:  .257"

Bullet Length w/o Tip Installed:  .949"

Bullet Length w/ Tip Installed:  1.242"

Bullet Weight w/o Tip Installed:  80 grains

Bullet Weight w/ Tip Installed:  82 grains

Ballistic Coefficient w/o Tip Installed:  .125

Ballistic Coefficient w/ Tip Installed:  .275

Projection Lenght Shot as Solid:  .338"

Required Twist Rate:  1:9" or faster

Retained Weight Shot as Hollowpoint:  approximately 54 grains

Add a Review

Be the first to review this product! You'll be the talk of the town.

Log in now to write a review.

Was this page helpful? Submit your own rating by logging in.