Hornady Brass 30-06 Springfield Unprimed Bulk Bag of 100
Product Information
At Hornady, brass is the foundation for what could be the most memorable shot of your lifetime. Extra time and care is taken in the creation of their cases, producing smaller lots that meet strict quality standards. Hornady cases offer reloaders excellent uniformity in wall thickness, weight and internal capacity. They are measured for consistently tight wall concentricity and even run our cases through a pressure calibration test to ensure uniform case expansion during firing. Hornady cases allow proper seating of the bullet, not only in the case, but in the chamber as well. High quality brass contributes to consistent charges and pressures.
Features:
- Hornady Unprimed Bulk Brass, Bag of 100
- 5% off a case (case = 15 bags)
- Tight Wall Concentricity
- Uniform Case Wall Thickness
- More Reloads Per Case
- Consistent Weight And Capacity
This is not loaded ammunition.
WARNING
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.Customers Who Bought This Also Bought
Our Price:
In Stock
Item #:
BG28407
Our Price:
In Stock
Item #:
HRN41000
Our Price:
In Stock
Item #:
HRN83202
Our Price:
In Stock
Item #:
HRN32050
Read 8 Reviews - Average Rating: 4.9 stars
Great For Cast Bullets
By Michael M. on Dec 30, 2020
This Hornady brass has thinner and softer necks than most brands. With jacketed bullets, this helps seat your bullets to a small runout. Since the bullets slide in easier. The softer neck springs back to grip the bullet more than a hard neck. IMO. Cast bullets press in easier reducing issues with the seating stem making dents in the bullets. I have 10 firings on the batch of 200 I purchased a few years back. They still look and measure good. Heaviest I've ever loaded them is to M2 ball spec. Most are shot through a 1903 Springfield with a then new Criterion barrel. Which ahs a snug chamber right on reamer spec. So no over working of the brass. I size with an RCBS X die which controls case length streatching. Anneal cases regularly on a little machine. People say you can get 20 fireings with the X die and care of your brass. Anyway, I'm ordering another 200 pieces to have on hand.
30-06 Brass, Good Brass
By Dennis M. on Jul 06, 2020
The brass I received was of good quality with no bad brass in the bag. It was cleaned and ready to size/deprime and get ready to load. I would buy it again and would recommend the purchase of this brass.
better velocity
By Stephen D. on Jun 03, 2020
I like this brass because I get better velocity and just as good accuracy as the more expensive heavier brass that has less volume
Great Brass
By Laval F. on May 30, 2020
This brass was consistent in length and weight. Every piece measured to within .002" of recommended trim length. As with all bulk brass it needed to be run through a sizing die to round out any case mouths that were not perfectly round due to shipping. Overall I would say, "great quality."
constance
By David D. on May 09, 2020
very constant, all wieght ^ length on the dot,,,
Great brass
By Phillip M. on Apr 18, 2020
Great quality brass for the 30.06
Glad i purchased
By Dakota E. on Feb 20, 2020
this really is good brass for 30-06. primer pockets felt good and no issues with dents or anything. Only fired it once so we will see how the primer pockets hold up
Great Brass for Loading 30-06
By Loren W. on Oct 19, 2018
This is my second buy of Hornady brass in 30-06 caliber and I am very happy with the quality. The most recent buy included one extra cartridge case and that was needed to replace another found to have a severely indented shoulder area. Otherwise, the quality is excellent and I will buy more when available and as needed.
Add a Review
Was this page helpful?
Submit your own rating by logging in.
What started as a small dream has become a multi-million dollar international business
selling ammunition, reloading supplies and accessories.
