BURSTFIRE PRIMER POCKET REAMERS SET

Burstfire - Ultimate Primer Pocket Reamer / Military Crimp Remover Set (Large & Small)

• First of all, if you've used other tools in the past, you know the struggle of dull cutters that won’t last long. We manufactured these with the highest quality material to ensure long term performance. You will appreciate the clean cuts / performance from our prep tools! And it comes with lifetime warranty! 
• *** Hate reaming / swaging? Burstfire Ultimate Small Primer Pocket Reamer is the easiest, fastest, and most effective solution on the market!
• Burstfire redesigned and Improved vs others on the market. Normal reamers cut at 35–40-degree angle, which will require excessive metal to be cut for the crimp to be removed. BFG Reamers 80–85-degree angle, to SAAMI dimensions, and requires minimal cutting.
• Cut radius for Burstfire tools is 0.0025 below standard primer dimensions. For small is 0.1730 and 0.209 for large, compared to 0.167 small and 0.202 large for most other products in the market (undersized). A quick “tap and go” is all you need! It's like swaging, but better, and faster.
• *The reamer does NOT need to be inserted all the way into the primer pocket. Insert until you feel / hear the cutting, and it should be sufficient! (unless your preference if to open it up a bit more to assist in ease of priming using a hand primer). It is designed to be quick “tap and go” and is all you need! It's like swaging, but better, and faster.
• *Best way to check correct / ideal primer pocket dimensions, is through the use of a Primer Pocket Go & No Gauge. 

Heat treated and hardened for ultimate durability then anodized to prevent corrosion. A case prep tool that will last a lifetime! All Burstfire products are backed by Burstfire's lifetime warranty.

Why Burstfire Reamers Are Better

Most reamers cut at a 35–40° angle, forcing you to remove excessive brass just to clear a crimp. Burstfire reamers use an 80–85° cutting angle, machined to true SAAMI dimensions, requiring minimal cutting while producing a clean, precise pocket entry.

Correct, Not Undersized - Many reamers on the market are undersized:

- Typical “small” reamers: ~0.167"

- Burstfire Small: 0.1730"

- Typical “large” reamers: ~0.202"

- Burstfire Large: 0.209"

This ensures proper primer fit without over‑cutting or deforming the pocket.

How to Use

The reamer does NOT need to be inserted fully.

Insert until you feel or hear cutting, and that’s all you need — a quick “tap and go”.

You can open it slightly more if you prefer easier seating with a hand primer.

For best results, Burstfire recommends verifying dimensions with a Primer Pocket Go/No‑Go Gauge

Why Burstfire Uniformers Are Superior

Most uniformers on the market are too small, causing the tool to wobble inside the pocket. This wobble, cuts unevenly, takes longer and removes more material than necessary.  

Burstfire uniformers are machined to the correct width and depth, eliminating wobble and cutting only what’s needed — never removing metal from the pocket walls.

Primary Uses

- Uniform uneven primer pockets for consistent ignition

- Prevent high primers that can cause misfires or slam‑fires

- Remove protruding flash hole material caused by incorrect decapping pins

- Restore pockets on heavily used brass

All tools use the industry‑standard 8‑32 thread, compatible with prep handles and case prep centers