CVA BARREL BLASTER CLEANING KIT VALUE PACK

CVA Barrel Blaster Cleaning System Value Pack

Value Pack Includes:

• CVA Barrel Blaster Rust Prevent Patches – 100 count
• CVA Barrel Blaster Quick-Clean Patches – 100 count
• CVA Barrel Blaster Parts Soaker – 4fl oz with lift out basket
• CVA Barrel Blaster Foaming Bore Cleaner – 7oz
• Also includes Dry 2" Round Patches

Instructions

WARNING: Make sure firearm is not loaded before beginning any cleaning process.

1. Begin by removing breech plug, nipple and other small parts and place into Parts Soaker basket to soak.
2. Using range rod with jag attached, swab inside of bore with one Quick-Clean patch to loosen fouling.
3. Next, spray Foaming Bore Cleaner into barrel according to instructions on can.
4. After appropriate wait time, use a clean, dry patch to remove foaming cleaner.
5. Once bore is dry, swab Rust-Prevent Patches into bore to prevent rust during storage.
6. Remove breech plug, nipples and other small parts from Parts Soaker basket, dry and reinstall.

NOTE: An anti-seize compound, such as CVA Anti-Seize Stick is recommended for all threaded areas. 

For added protection to all metal surfaces, use CVA Barrel Blaster Rust Prevent Spray.