1. Home
  2. Metallic Reloading
  3. Rifle Brass
  4. 280 Remington

Nosler Brass 280 Remington Unprimed Box of 50

Nosler Brass 280 Remington Unprimed Box of 50
Item #:NSL10160
Price:$71.99
$1.44 per piece
Buy 3 or more, save 5%! Only $68.39 per box!
Shipping: One flat fee of $12.95 per online order.
Exclusions apply. Click for details.
Availability:In Stock
MPN:10160
Read 6 Reviews
Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.

Product Information

Manufactured with the traditional Nosler philosophy of uncompromising attention to detail, NoserCustom cartridge brass is created to exact dimensional standards and tolerances using quality materials for maximum accuracy, consistency potential and long case life. Nosler brass is full prepped and ready to reload. Case mouths are chamfered and deburred. Each case is hand inspected and weight-sorted. Flash holes are deburred and checked for proper alignment. This is not loaded ammunition.

Nosler
View more Nosler products

Read 6 Reviews - Average Rating: 4.3 stars

 Nosler brass

By Hank E. on Sep 27, 2023
Great price and great shipping

Nosler 280 Remington Brass

By Brett F. on May 07, 2023
I found the hard to find Nosler 280 Remington brass at Graf and Sons. I ordered two boxes of brass from them. With the ease of online ordering, easy check out, and fast shipping; I will definitely be ordering from Graf and Sons again. As far as the Nosler 280 Remington brass goes, it is very good quality and I wouldn't hesitate to recommend Nosler products to other buyers looking for quality products.

Hard to find

By Patrick A. on Nov 17, 2022
Hard to find caliber Graf's had them - and Nosler makes good brass

Made of gold! (Not really)

By James L. on Oct 01, 2022
Finding 280 Rem brass after searching for so long was like striking gold.
Finding no prep, beautifully made brass was a bonus.
My loads run 1 1/4” at 100 yards out of my Remington Mountain rifle with 140 gr ELD-X bullets over IMR-4350.

NOT TO NOSLER STANDARDS

By Bruce B. on Jan 02, 2020
I bought another box of 280 to go with the other 3 I recently purchased. This box was "20" gr heavier than the other 3! It also was over 3 gr spread with one was about 3gr above the the low in that box. When I called them & said that was really unacceptable to have that kind of difference between boxes & could cause a major problem if it was someone that didn't weigh every piece. Between the 3 box wts & the hi of the other box, it held 2.2 gr more of BLC ball. If you had a max load worked out for the lower 3 boxes & loaded that load in the other box, with the much thicker brass, which equals more pressure - you might have a big big problem!

Now I have lots of Nosler brass & have been a big proponent of them previously, as their brass has always been well within their +/- .5 & usually less & their brass is prepped great & runout on case necks is usually the equal of Lapua, which I also use.

In this order I also had 25-06 & 6CM Nosler brass & they were up to standard & were within normal range of my other Nosler brass in those calibers.

Also a case of Lapua 308 100ct, & had 36 of exactly the same weight, another 30 of the same wt & one of 27 the same wt.! All within .5 gr. of ea other. Just to throw that out there!

Nosler is sending me replacement brass (supposedly) & I'll be sending this back with my grains of water & powder results.

Hope this is a "one of" screw up.

Nosler 280 Remington Brass

By Scott K. on Sep 20, 2018
Nice brass. Spoils a guy not having to prep the cases.
Was this page helpful? Submit your own rating by logging in.