- Metallic Reloading
- Rifle Brass
- 22-250 Remington
Prvi Partizan Brass 22-250 Remington Unprimed Bag of 50
Imported from Serbia. Fully reloadable brass cases. Accept boxer primers. This is not loaded ammunition.
Read 22 Reviews - Average Rating: 4.8 stars
By Tim M.
on Dec 18, 2020
Brass arrived boxed by expert warehouseman , each brass order in seperate box with internal packing, no dents or dings in any batches , no split necks , etc. Use in metallic shooting with 70 to 80 % load data , depending on powder available, older examples have 15 FL reloadings with no signs of any problems after inspections , very happy with product , price.
By Carey B.
on Oct 20, 2020
Very good Brass, uniform size and weight from casing to casing. Highly recommended!
By James G.
on Sep 15, 2020
Great quality at a great price! I've loaded (and fired) 100 pieces three times, and the brass is holding up great. Primers are still seating well and accuracy remains consistent. This brass is hard to beat for the price.
Pri Partizan 22.250
By Paul H.
on Sep 09, 2020
love this brass, I'm not fanatic like most that weight and concentric measures everything!! I load it with my favorite accuracy recipe and they work. Can't beat the price. They just went up now? BUTT still great value and quality product.
Priva Partizan 22-250
By Randy H.
on Sep 03, 2020
cant beat the price. Loads were accurate but i did separate by weight.. good quality and i feel as good as Win or Rem stuff.
PPU Brass 22-250
By Francis C.
on Aug 13, 2020
Really nice Brass . They must come really close to specs,
Sized verily easily with just a little lube . My EtronX Rifle thanks you .
All good so far
By Brian B.
on Aug 03, 2020
I have not used PP brass in the past, but when I saw them listed at a great price, I decided to give them a shot. I have not loaded and shot any of them yet, but here are my first impressions:
1. Exterior of the brass seems to be very good; no tarnish, marks, dents, etc.
2. The flash holes look to be very uniform, and appear to be drilled rather than punched. That's a plus.
3. I did size and prime a few of them. No problems with either. Primer pockets are maybe a little tighter than other commercial brass, but I had no problems seating primers with my Frankford Arsenal hand primer.
4. Unless there are problems lurking that are not readily apparent, this seems to be excellent brass for the average (ie. non-competition) reloader.
By R.J. K.
on Jul 22, 2020
Excellent product will buy more.
PPU .22-250 Brass
By Terry H.
on Jul 15, 2020
I decided to try the PPU Brass in .22-250 due to a great sale price & prior reviews. As stated by others, my brass arrived with minimal damage to necks or case body. Appears uniform, primer pockets seemed tight, not as tight as Lapua, but 1/3 the price. Some small variance in neck tension/wall thickness, but again not terrible. I believe this will be better base brass than W,R or H brand brass. Not up to Peterson or Lapua quality - but again a bargain at the price I paid at Graf's.
Prvi Partizan 22-250
By Chet C.
on Jul 02, 2020
Don't overlook PPU it is quality brass! I will definitely be ordering more.
By Richard B.
on Jun 05, 2020
1st time using this brass overall the quality seems very well no issues with primer pocket a few dings but sized the neck
Ppu 22-250 brass
By Jonathan M.
on Jun 01, 2020
Quality brass for very reasonable price. Out of 550 pieces only one had a partial split in neck, I could have loaded that brass but decided to set it aside for when I need to modify one. Graf is a good place to buy brass from. Would recommend them.
Prii Partizan 22-250
By DWAYNE M.
on May 21, 2020
Great cases at an even better price. Purchased 150 of these to give a try and thus far am quite impressed by the consistency and uniformity from them. All have measured within .01 to .02 from one another. I've only reloaded 50 so far but all went well, including smooth but firm priming. Will definitely purchase these again and highly recommend.
By Herbert B.
on May 02, 2020
Purchased 1000 of these, all arrived from the same lot number. The length was all practically identical. I uniformed the primer pockets and found them to be very tight for my primer pocket uniforming tool. I was concerned since past reviews stated loose pockets were a problem in previous batches. I found no shoulder folds or rejects on initial inspection. Prior to neck turning, I found that neck thickness with my vernier micrometer read from 0.013 to 0.015. Very little material had to be removed for concentricity. This brass was very easy to work up prior to annealing and loading.
By Russell B.
on Apr 05, 2020
I’ve used this brass for several years now with no complaints. It is good quality brass and just as cheap as the so-called pulled down junk other manufacturers try to peddle. Always been highly satisfied.
By Morgen M.
on Mar 19, 2020
I ordered 3 bags and luckily all the same lot for 22-250. Packaging was excessive / excellent:) Not a single flaw (dinged necks, shoulders, nothing) on all 150 cases. Case count was accurate. Flash holes were mainly uniform ( the roundness of the hole) but 3/10 I would catch some material. Neck turning, non aggressive, just enough to even them up. 3/10, barely touched, <20% area cut. 6-7/10 40-50% cut. 3/10 holy mackerel! 100% cut. Thick. ( I literally rechecked my cutter. )
Very limited on burrs inside case by the flash holes. Primer pockets, 6-7 /10 were in spec. 1-2/10 were tight, 1-2/10 loose But not horrible. All primer pockets cut had the same amount of material cut out the bottom, very limited ( a small o) . Not match grade out of the box, but probably close now! Excellent value. Excellent shipping turn around time. Ordered in the evening, shipped in the morning received in like 2-3 days. Grafs has it together. I’ll be back!
Prior Partizan 22-250 brass
By Louis O.
on Oct 17, 2019
I needed to order some 22-250 brass and usually go to Graf & Sons for reloading supplies. This was the only brass in stock and though it was below the price range I was thinking to spend, I decided to give it a try. I thought it might be an inferior product compared to some others that were more costly but out of stock.
I was impressed with quality of the product and yesterday after doing a little prepping, loaded up the hundred casings I ordered. Now I just need to get to the range.
Excellent for the value
By Matthew K.
on Sep 26, 2019
Have been using Prvi in 22-250 for more than 8 years now and have no complaints about the durability or quality. When compared to a recent purchase of a big name brand, starts with a “W”, the big name brand lot of 100 had 30 rejects split necks and cracked shoulders. I sent those back to “W” and they said they will refund my purchase price. Still waiting on the check. Will now stick with Prvi for all my 22-250 brass needs.
PPU .22-.250 brass - high value & quality
By S Peter P.
on Aug 16, 2019
I have been happily using PPU brass for years. I have found PPU brass to be very uniform and well annealed. Making the PPU .22-.250 brass for small primers might be considered. Visual & measured inspections provide indications of uniformity and sustained use shows it is well annealed. Great deal - I plan to get some 6mm Rem for my 6mm AI.
PRVI PARTIZAN BRASS 22-250 REMINGTON UNPRIMED 50/BAG
By Rodney S.
on Jul 25, 2019
Mixed internet forum reviews on this brass, but I rarely pay attention to "keyboard captains." How bad could this brass be? I've shot Prvi loaded ammunition for years with never a misfire.
By David R.
on Nov 05, 2018
Many of my friends think that PP brass is a 3rd world product and lacks the consistency of the better known brands. However this couldn't be any further from the truth. I have been using PP brass and shooting their ammo for years and never found issue with either.
If you will weigh the cases from a batch you will find that the consistency within +-2 grains. You will find the case volume is also of the same consistency.
Prii Partizan 22-250
By John B.
on Oct 12, 2018
I was somewhat surprised, this is very good quality brass. Everything weighed and measure with high uniformity, and so far it has shot accurately and resized without issue
1 of 1 customers found this page helpful.
Submit your own rating by logging in.