Prvi 22 Hornet Brass Bag of 50

The brass is very consistent and reasonably priced.

Am delighted with the high quality and anticipated life of this brass. Precision and consistency between the pieces so it makes reloading less painstaking. Buying from Graf & Son continues to be satisfying.

Great Brass!! I have loaded it 5 times no problems. I will definitely purchase it again. Fast shipping from Graf & Sons.

This rifle was relined to a 22 hornet from original 22 WCF. Prvi Partisan brass works well. Very happy happy with quality of brass. I load 45 grainers to a max of 2,200 fps for this rifle.

Very satisfied

Uniform brass good quality on a product hard to find

Brass is consistently uniform in size. Have had good results in a CZ hornet rifle and TC contender pistol. I’m planning on trying it to form 17 hornet. I’m glad that Grafs have it available.

Good Hornet brass.

I have been looking for new 22 Hornet brass for quite some time now. I came across Prvi Partizan at Graf and Sons. I have use this manufacturers product in the past. I have never had a problem with their products. Once again I have had no issues with product either. It is a safe well made product that should not be avoided. If it is what you are looking for you can purchase it with conficence.

Great brass, hard to find, good price, fast shipping, will buy more. Graf's is top notch company

Graf & Son had this brass in stock when I needed it and at a great price and fair flat rate shipping. I find myself shopping Graf & Son more and more. Thanks for your excellent service!

THE BRASS IS HIGH QUALITY. THIS COMPANY HAS HARD TO FIND BRASS THAT IS AFFORDABLE.

I use these shells on a T/C contender and they are excellent! I hope they last.

I have tried several brands of 22 hornet brass, including R-P, W-W, and Herter (old), and found Prvi Partizan to be the most accurate in my rifle.

After trying several different brands of brass this Serbian brass has been the most durable and I get more than 1 reload per piece of brass.I had splits with 2 other American companies and upon reading what others have said about this brass I bought some and don't have the issues I had with the other brands.

I have used this brass for sometime, good quality, a great value.

Great price and quality on hard to get brass.

I couldn't find any 17 hornet brass, so I bought this and was able to run it as-is through my 17 hornet dies, then trim it. Had to use a little gun oil on the case when the fire forming and clean the rifle after every two or three shots. Only got split necks a couple times when I hadn't put enough oil on the case or cleaned the chamber out often enough. Didn't anneal or anything

this brass was on time and beautifully packaged. great for reloading!!!! i'd give it 5 stars!!!!

Happy to just be able find 22 Hornet brass, and very happy that Graf and Son's had it for a reasonable price.

Nice heavier weight brass. No crimped mouths from shipping/handling. Only new/clean Hornet brass available and affordable

These are great easy to load easy to prime and get more reloading per case. thank you for what you do Richard Hand.

Have purchased many different calibers of Privi brass. Top quality combined with top service with Grafs; impossible to beat!

I'm completely happy with the PPU 22 Hornet brass I just received from Graf & Sons. Hornets are getting more difficult to feed. It was great to find good brass at a good price.

Great brass and in some cases the only viable option for those odd ball calibers. Thanks Grafs for continuing to stock this brass.

Thicker brass than winchester or remington. Adjust your loads accordingly. That said I would rate the quality as good if not better than the previous mentioned.

This brass has case weight and wall thickness that is great.

Makes better 17 Hornet than anything you can buy ready made. Be sure to anneal the shoulders after forming though.

We also use it as it is in our Winchester Model 43s and CZ 527s.

Good brass, at a good price

Picked up some of this a few years ago and it is still going. Heavier brass. Necks are somewhat thicker which is great for uniforming by outside turning. They are also just a bit longer and I also use it to form 17 AI Hornet so the extra length is great for trimming after fire-form. Anneal the necks before fire-forming and you’re in business. No splits and lasts longer than Winchester and WAY longer than Remington. Don’t anneal and you’ll split a lot.

This is some pretty good quality brass. It just flat out works and I expect that it should last a long time. I wouldn't hesitate to buy it again.

There is nothing wrong with a great deal. I had a bunch of Hornady brass crack in the first firing!

Have not loaded yet but good looking brass.