Prvi Partizan Brass 5.56 NATO Unprimed Bag of 50

Prvi Partizan Brass 5.56 NATO Unprimed Bag of 50
Item #:PPC556
Price:$18.19
$0.36 per round
Shipping: One flat fee of $9.95 per online order.
Exclusions apply. Click for details.
Availability:In Stock
Quantity Limit:Only 5 PPC556 allowed per customer. Duplicates will be canceled.
MPN:PPUC556
Due to the packaging and shipping process, case necks are often slightly dinged or bent and need to be rounded up and sized to give proper neck tension. New and/or fired cases must be full-length resized or have the expander ball of the sizing die run through the case neck prior to loading.
Read 12 Reviews

Product Information

Imported from Serbia. Fully reloadable brass cases. Accept boxer primers. This is not loaded ammunition.

Read 12 Reviews - Average Rating: 4.9 stars

PPU 5.56 Brass

By Daniel C. on Aug 15, 2020
Works great

Excellent Brass!!

By David G. on Aug 13, 2020
I've loaded many different calibers of PPU brass, never had an issue. It is reasonably priced and consistent in quality. The 5.56 is no exception. My Go-To Brass!!

Prvi Partizan Brass 5.56 NATO Unprimed Bag of 50

By RONALD M. on Aug 13, 2020
Good Brass, - Better in quality than some domestic manufacturers. - Easy to load and case capacity is consistent. - Loaded for 5.56 AR Pistol with 55 gr. bullets & Ramshot X-Terminator.

5.56 unprimed brass

By Dave H. on Aug 10, 2020
Just loaded 250 rounds without a single problem.

PPU 5.56 new brass

By Michael G. on Aug 08, 2020
I have yet to shoot this so I'm only giving the product 4 stars. Prepping it with case lube and neck graphite, then resizing it with an RCBS .223 small base die was easy. The cases needed little or no trimming to get to 1.750" (Hornady & Speer trim-to length). You can tell the necks were annealed by their blue/silver color. The price was very reasonable. I would buy this again if I can't get once-fired cases cheaper.

Great quality for the price!

By Sean G. on Aug 03, 2020
This brass is excellent, always consistent cartridge weight, and brass thickness. They required less prep work compared to other brands I've used. I've reloaded one set of this PPU 5.56 brass 5 times now, and no issues whatsoever. Primer pockets stay consistent as well. Really hard to go wrong with this brass.

PPU 5.56 Brass

By Casey L. on Jul 30, 2020
Excellent Brass. I use these to make 20 Practical and they perform wonderfully! As for the few tight primer pockets others talk about, doesn’t bother me one bit. Tighter is better... No complaints here. Will definitely buy them again.

PPU 5.56 brass

By Chet C. on Jul 11, 2020
Quality brass, primer pockets are a little tight on a few like others have mentioned but nothing extreme. I will definitely buy again when I need more.

High quality - ideal for precision rodent shooting

By S Peter P. on Jul 04, 2020
Very uniform neck wall thickness about .001 - easily cleaned up with minor turning. Primer pockets uniform with centered flash holes, width and depth - no primer protrusion. Brass was length uniform and easily trimmed to 1.75. Redding body die & Lee collet & seater die were used to load up 200 for use against rodents with 53 VMax's, CCI 450's & IMR8208.

Superb Quality

By Emmitt R. on May 17, 2020
Some primer pockets are tighter than others.

Good brass for the money

By Mark K. on Nov 01, 2019
Good brass for the money but the primer pockets are very tight.

Excellent quality

By Robert W. on Jan 24, 2019
My expander ball says there's a little variation in neck thickness. A few, perhaps 5/50 didn't drag on the ball when lowering the ram, but were still sized enough to put good tension on the bullet. Primer pockets are fairly uniform, a little rounded on the bottom outer edges and the flash hole has a bit of a burr inside that needs removed. I'd rather buy larger quantities, but sometimes 50 is all you need!
Was this page helpful? Submit your own rating by logging in.