- Metallic Reloading
- Rifle Brass
- 6mm Benchrest Norma
Peterson Brass 6mm BR Norma Unprimed Box of 50
Only available at Graf & Sons.
All Peterson Cartridge casings come in one of their plastic ammo boxes.
Made in the U.S.A.
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
This is not loaded ammunition.
Read 32 Reviews - Average Rating: 5 stars
6BR Norma Peterson Brass
By William M.
on Mar 27, 2023
By Blake L.
on Mar 19, 2023
In addition to the brass being great quality, I appreciate getting it in its own plastic ammo box.
By Theodore A. S.
on Mar 13, 2023
great quality and care taken to deliver brass in top condition. american made.
Consistent good brass
By Cory B.
on Feb 21, 2023
Great quality and consistent neck thickness and the box they come in is a plus.
6BR Norma brass
By Scott M.
on Feb 15, 2023
This stuff performs. Thought I'd try it as the brass I had used for years is unavailable. Neck thickness, C O L, and weight, uniformity all equal to or better than the stuff I had been using for years. Fire formed 12 rounds at 100 yards and had one group in the 1's. I am impressed.
By Brian K.
on Feb 04, 2023
American made first off! Just as consistent as other “top brands” if tried and more importantly was available. Excellent service from Grafs as usual!
My new favorite brass
By Martin T.
on Feb 03, 2023
After trying Peterson brass in a few different cartridges it has become my first choice when purchasing brass now. It has been very uniform and performance has met all expectations so far. I haven't shot any of it enough to speak about it's longevity but I don't expect it be deficient in that regard. My only wish it that it was available in some of the other cartridges I shoot.
Peterson 6BR brass
By Dennis C.
on Jan 06, 2023
I found the brass to be extremely uniform and when fired my groups were just as good as when I'm using Lapua brass.
6 BR Bass
By Michael F.
on Jan 06, 2023
Even though the package says not to fire-form, I have a 100% success rate forming to 6BRX. This is after 300 cartridges. After forming, they run through the full length sizing die nicely, almost as if no work is being done to the brass. These cases are top-notch!
By Lawrence K.
on Jan 05, 2023
I can't say its better than Lapua but it very close.
Good, repeatable, neck tension, excellent case life.
Would buy it again.
6 BR Bass
By Keith D.
on Jan 02, 2023
Excellent quality product. My group size tightened tremendously with the same load just by using the Peterson brass.
Peterson Brass 6mm Br
By Greg L.
on Dec 30, 2022
Excellent Quality! Came in a great ammo box that can be used several times
By Tom H.
on Dec 26, 2022
This brass is of top notch quality. No dings, dents or any other oddities. A wonderful product.
Peterson 6mm BR Brass & American Made
By Mike F.
on Dec 22, 2022
I recently purchased some Peterson 6mm BR brass and i am very pleased with the quality, i weighed 30 pcs. from a 50 rd. box and all 30 pcs. exactly 132.0 grs. you can't ask for more than that! AAA+++
6BR Peterson Brass
By Rocky C.
on Dec 22, 2022
Excellent brass excellent packaging. This is as good as Lapua plus Grafs has it. Excellent shipping from Grafs. I bought this brass to make 22BR from it my 6BR. I already have plenty of Lapua different brands make it easier to sort also.
By John L.
on Dec 16, 2022
The delivery from FedEx was better than the last time. The brass was excellent as I was expecting it Peterson packs it unbelievable. But the service that I got from Grafs is par excellence no One compares to them.
By Michael S.
on Dec 12, 2022
Great product highly recommend it to all my shooting buddies and Grafs as always are great to deal with
Top Quality Brass
By Lonny W.
on Dec 11, 2022
This brass is as good as it gets. Very consistent.
By Shawn S.
on Dec 09, 2022
Great product so far
My New Favorite Brass
By James W.
on Feb 22, 2021
I was very impressed with the quality and uniformity of these cases. Neck wall thickness was very consistent, the weight of all the cases was also very consistent, more so than what I had hoped for. They also came packed it a good hinged top box, that was the icing on the cake.
By Thomas L.
on Dec 08, 2020
I have been loading for 50 plus years & have used them all but I have never seen any with the consistency in weight & wall thickness as Peterson brass, wish I knew of them a long time ago, won't buy anything but Peterson from now on. Can"t wait to try them.
Outstanding American made product!
By Anthony C.
on Nov 26, 2020
Long a Lapua user, I've switched to Peterson for my 6mmBR.
Seems more consitant and heavier. True to their claims, higher velocity with same powder loads as used in competitor's cases.
Peterson 6mm BR Norma Brass
By James M T.
on Oct 22, 2020
I am using this brass for forming 6.5 BR Remington brass. Stepping up the brass to 6.5mm was very easy and consistent using a sizing mandrel. I then full length resized which again went smoothly. I believe the entire process including the final trim to length process went smoothly due to the exceptional uniformity of the annealing process and the quality of the brass. I will definitely purchase this brass again!
As good As Lapua
By John N.
on Aug 21, 2020
This brass is outstanding just like the other reviews had. Very good annealing, comes packed in a damage free case which Lapua has been really cutting cost where the foam that came in their boxes to keep Brass from moving during shipping has been removed and no longer packed in their brass! I have other Peterson Brass and the quality is there. This 6 BR brass shoots as good as Lapua also. Pleased as Expected!
By Carroll J.
on Jun 09, 2020
This is the brass I use to form 30 br. It actually forms easier than the Lpula brass and has less of a doughnut . Turning the necks seems to be more consistent also. Would recommend this brass. Go USA.
By Mason P.
on May 25, 2020
Formed from 6br to 6BRA
Primer pockets are very reliable after multiple firings
By David S.
on May 16, 2020
I went from Lapua to Peterson Brass and it is more consistent with weight, and I won't go back. I will buy Peterson in every cal that I shoot If they have, I wish that they made it in 300 Win Mag.
By Donald B.
on Mar 04, 2020
best brass on the market, some lapua brass had 64 percent cull rate. if this brass was available when 6br first came about, ppc would be just a rumor. love the idea of the box. easier shipping great benefit for the shooter. will buy more, thanks for a great product, don
Near perfect brass
By Jerry G.
on Jan 05, 2020
I ordinarily use Lapua for my 6BR Benchrest gun. I decided to try some Peterson even though I've had excellent results with Lapua. I always cull outliers in weight or neck thickness and Lapua is very good at an average of 85-90% useable and the rest foulers. Astonishingly 100% of the Peterson was sorted into sets of 5 with each group less than a 10th of a grain variance from low to high in weight. No neck thickness culls. First firing produced groups that were .2's and 3's when fireforming. I expect fireformed brass will be even better. Great value.
Peterson Brass 6mm BR Norma Unprimed Box of 50
By RONALD M.
on Dec 31, 2019
Excellent Quality & Uniformity.
Prompt Delivery By Graf & Son's
This Brass is of USA Manufacture and rivals the best of imported brass in the same caliber.
Great to have a US Manufacturer Step-Up and Bring in demand products to market.
- Thank You Graf & Son's & Peterson Cartridge Co.
Great American made brass
By Carl w G.
on Oct 31, 2019
fired formed great from a 6br to 6brx. I'll up date after several firings and annealing's.
More consistent than Lapua and zero neck dings
By Thaine C.
on Oct 14, 2019
I know the body of the item description for this brass states that dinged necks are possible but that is just incorrect and needs to be removed. This brass ships in a case individually packed and covered with foam so there is no way brass can move or get dinged. They'll get around to fixing it. The quality of the brass is amazing and the consistency is why I'm switching from Lapua to Peterson. The only prep I do is a slight chamfer/debur on the necks and I'm good to go.
I recommend a using a 6mm mandrel vs sizing the necks with your expander in the resizing die. A mandrel will improve your loads and eliminate a source of runout.
Was this page helpful?
Submit your own rating by logging in.