- Metallic Reloading
- Handgun Dies
- Die Sets
- 7.62 Russian Nagant Revolver / 7.62x25 Tokarev
LEE 7.62MM RUS NAGANT REV STEEL 3 DIE SET, S/H #6
Lee 7.62 Nagant Steel 3-Die Set. Includes Full Length Sizing Die, Bullet Seating Die and Powder Through Expanding Die, Universal Shell Holder and Instructions. Load data is not available for this cartridge. These dies were designed and manufactured for MidwayUSA. Before ordering these dies, please reference this knowledgebase article on Lee's website.
Lee resizing lubricant is required with this die set.
WARNING: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov
WARNING: Steel parts in this product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.
Read 2 Reviews - Average Rating: 4.5 stars
A Good Base to Begin With But Needs Extra Work to Get Right
By Stephen J.
on Apr 26, 2020
If you DON'T expect to start cranking out factory type 7.62x38mmR using once-fired commercial brass without any fuss, then you won't be disappointed. You might find as I did that carefully sorting brass (even between "new" and "old" style PPU because of rim and groove differences), then annealing, meticulously cleaning and heavily lubing the cases will go a long way to make your go at it much easier. Many posts/videos out there to help you get these going. FWIW, I had to use an RCBS 9mm shell holder for half my brass. All that said, the folks at Lee were very helpful in getting my particular die set straight for what I wanted to do, after I sent them in.
Great Starter to make REAL nagant rounds
By Zachary S.
on May 01, 2019
check the youtube videos if you want to make sealing nagant rounds. you will need to borrow the expander / decapper from a .303 or 7.62x54R die set. also will need a different shell holder but I was able to duplicate Factory Nagant without corrosive primers!
1 of 1 customers found this page helpful.
Submit your own rating by logging in.