- Metallic Reloading
- Case Cleaning & Prep
- Case Trimmers & Accessories
LEE 30-06 SPR. CS LENGTH GAUGE & SHELLHOLDER
The simplest way to check the case and trim to the correct safe length is with a Lee Case Trimmer. After a case has been loaded a few times, it will stretch beyond maximum length and must be trimmed. The Cutter and Lock Stud (sold separately) works for all calibers. The Case Length Gauge (Pilot) and Shell Holder must be ordered for each caliber. Trim cases by hand or electrically. Can be used with an elecrtric drill to trim, chamfer and polish cases faster. Eliminates danger of long cases. Squares the mouth for more accurate bullet seating and exit. Includes Case Length Gauge and Shellholder only.
Read 2 Reviews - Average Rating: 4.5 stars
Quick and easy
By George H.
on May 13, 2020
Have yet to find a trimmer that was worth a flip.
This little jewel does the job quick, easy, and most importantly accurately. I use these for all my case length needs.
By Kevin J.
on Mar 13, 2013
Ive seen reviews in the past that say that these measure from the inside shell base for trim length. That is not the case. When used with the required cutter and lock stud the pin goes thru the flash hole and rests against the lockstud base for proper trim length. These work just fine and are easy to use.
Was this page helpful?
Submit your own rating by logging in.