- Metallic Reloading
- Rifle Brass
- 6mm Creedmoor
Peterson Brass 6mm Creedmoor Small Primer Unprimed Box of 50
All Peterson Cartridge casings come in one of their plastic ammo boxes.
Made in the U.S.A.
NOTE: If you plan to load above SAAMI max pressure and are concerned about primer-pocket leak, Peterson recommends you try the 6mm Creedmoor SRP. While they do not suggest loading over SAAMI max pressures, Peterson's small primer pocket 6mm Creedmoor have proven to hold up over SAAMI max pressures when tested in their universal receiver.
Warning: Only use Peterson Cartridge Co. casings in firearms in good condition, designed, marked, and chambered for this cartridge. Do not use Peterson Cartridge Co casings for “fire forming” or any other purpose other than what they were designed and tested for. Peterson retains no responsibility for the enclosed casings if they are used outside of the manufacturer’s recommendations.
This is not loaded ammunition.
Read 15 Reviews - Average Rating: 5 stars
Peterson 6mm CM brass
By Steven M.
on Dec 08, 2020
This is high quality very consistent brass. The weights were all very close to each other, packaged very nicely in a nice ammo box.
Top Quality Brass
By John D.
on Sep 24, 2020
Uniform weights of each case and well-packaged. This is my go-to source for 6mm brass. Top competitive shooters seem to agree. Can't wait to hit the range with fresh loads!
6mm Creedmoor SRP brass
By Kevin D.
on Sep 12, 2020
This is super quality brass. It is what I use for PRS match’s. It is great to get the ammo box, very little prep work. I always size just to make sure of consistent neck tension, but that’s it for the prep.
Peterson 6MM creedmore
By David B.
on May 27, 2020
Great brass, small primer pocket, comes it's own box
Peterson 6mm creedmoor SRP brass initial impression
By David C.
on Apr 05, 2019
I compared the Peterson brass to the Lapua 6.5 Creedmoor I have been resizing and I am impressed.
Flash holes are uniform, case length is very consisten. 1 particularly interesting point I found is that the Peterson brass chambered in my Odin Works AR barrel much better and more reliably. I have been having problems w/ the Lapua having high pressure symptoms even while using published loads. I plan on using Peterson brass for my AR10 and Lapua 6.5 resized for my RPR 6 creedmoor going forward. Check out https://www.ocabj.net/peterson-cartridge-6mm-creedmoor-small-rifle-primer-brass-review/
By Mark C.
on Mar 26, 2019
Very good brass. Very consistent in length and weight. Cases are prepped and ready to go. Mouths are inside chamfered and look great. I have several calibers of Peterson brass and all brass is very good. Highly recommend.
By Chris B
By Chris B.
on Mar 22, 2019
Great brass will continue to use and recommend peterson brass
Seems to work as good as Lapua
By John N.
on Mar 08, 2019
I have always reloaded Lapua Brass, never had an issue, So I did want to try Petersons, So far the quality seems really good, I have some in 6 creedmoor now, the 260 I got had done well, I will have to shoot it allot to see how long it lasts !
By Robert W.
on Feb 06, 2019
Best brass I have used - very consistent through out 250 rounds of 6mm creedmoor
Peterson 6mm Creedmoor srp brass
By Josh C.
on Jan 24, 2019
Very consistant neck walls and weights
By Sam M.
on Jan 24, 2019
Excellent quality brass and exceptional service from Grafs!
6mm Creedmoor Select Brass
By PAUL B.
on Dec 26, 2018
First time ordering from Grafs. Packaging was exceptional as was the quality of the product. Will buy from them again!
Peterson 6mm Creedmoor brass
By Ed H.
on Dec 13, 2018
Weight and measurements were really consistent. My first groups working up loads (3 shot) were 1/2 to 3/4 inch at 100 yards. Great brass and the ammo box was a bonus.
By Russell M.
on Sep 07, 2018
A quality product. Packaging is a plus with good ammo box.
By Harvey L.
on Aug 02, 2018
Very consistent weights individually as well as lot to lot. New coating to necks is an improvement. Will continue to use!
Was this page helpful?
Submit your own rating by logging in.